834
電腦幫助
[BIOS設置]GA-8IDXH主板BIOS設置－芯片組設置
GA-8IDXH主板BIOS設置－芯片組設置
GA-8IDXH主板BIOS設置－－芯片組設置如下圖：
Configure DRAM Timing
SPD 由SPD來設定 SDRAM Timing Control 為自動偵測. (默認值)
Manual 設定 SDRAM Timing Control 為手動.
CAS Latency Time(SDRAM CAS 延遲時間 )
2 設定 SDRAM CAS Latency 為 2.
3 設定 SDRAM CAS Latency 為 3. (默認值)
Active to Precharge Delay
5 設定active to Precharge delay timing is 5 clk.
6 設定active to Precharge delay timing is 6 clk.(默認值)
7 設定active to Precharge delay timing is 7 clk.
SDRAM RAS-to-CAS Delay
3 適用於67 / 83 MHz SDRAM DIMM內存模塊.(默認值)
2 適用於100 MHz SDRAM DIMM內存模塊.
SDRAM RAS Precharge Time
3 適用於67 / 83 MHz SDRAM DIMM內存模塊.(默認值)
2 適用於100 MHz SDRAM DIMM內存模塊.
Refresh Mode Select
7.8 usec 設定active to Refresh mode timing is 7.8 usec.
15.6 usec 設定active to Refresh mode timing is 15.6 usec.(默認值)
64 usec 設定active to Refresh mode timing is 64 usec.
DRAM Data Integrity Mode
ECC 設定DRAM Data Integrity Mode by ECC.
Non-ECC 設定DRAM Data Integrity Mode by Non-ECC. (默認值)
DRAM Read Thermal Mgmt
Disabled 關閉DRAM Read Thermal Mgme . (默認值)
Enabled 啟動 DRAM Read Thermal Mgme.
Delayed Transaction(延遲訊號交易 )
Disabled 正常運作.
Enabled 用於係統中較慢的ISA裝置.(默認值)
AGP Graphics Aperture Size
32 MB 設定AGP Graphics Aperture Size 為 32MB.
64 MB 設定AGP Graphics Aperture Size 為 64MB. (默認值)
Delay Prior to Thermal
816Min Set active CPU Thermal function after booting 16 Min.(默認值)
864Min Set active CPU Thermal function after booting 64 Min.
以上GA-8IDXH主板BIOS設置－－芯片組設置內容出自幫助大全，感謝瀏覽~！
最後更新：2017-04-08 11:49:00