阅读467 返回首页    go 小米 go 小米5


小米路由器3G升级到稳定版 2.24.313,漏洞还在,导出一些信息。

给做第三方插件的提供一些信息

nvram配置项:

bootcmd=tftp

bootdelay=5

ethaddr="00:AA:BB:CC:DD:10"

ipaddr=192.168.31.1

serverip=192.168.31.100

ssh_en=0

restore_defaults=0

model=R3G

flag_boot_type=2

mode=Router

flag_ota_reboot=0

flag_last_success=1

uart_en=0

telnet_en=0

SN=15757/30038888

wl0_ssid=Xiaomi_3E88_5G

wl1_ssid=Xiaomi_3E88

wl0_radio=1

wl1_radio=1

boot_wait=on

no_wifi_dev_times=0

color=101

CountryCode=CN

nv_sys_pwd=d090d81234f20557df8c12340f00a1e37fcde8b3

nv_wan_type=dhcp

flag_boot_success=1

flag_try_sys1_failed=0

flag_try_sys2_failed=0

normal_firmware_md5=eb58e76803df9c8c20e8c87d36be4a05

Router_unconfigured=0

nv_wifi_ssid=Xiaomi_3E88

nv_wifi_enc=mixed-psk

nv_wifi_pwd=1234567890

nv_wifi_ssid1=Xiaomi_3E88_5G

nv_wifi_enc1=mixed-psk

nv_wifi_pwd1=1234567890

flag_flash_permission=1

flag_show_upgrade_info=1

stdin=serial

stdout=serial

stderr=serial

flag_boot_rootfs=1

mount信息:

rootfs on / type rootfs (rw)

none on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)

none on /proc type proc (rw,nosuid,nodev,noexec,relatime)

none on /dev type devtmpfs (rw,relatime,size=125780k,nr_inodes=31445,mode=755)

tmpfs on /tmp type tmpfs (rw,nosuid,relatime,size=227836k,mode=755)

/dev/mtdblock13 on / type squashfs (ro,relatime)

tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=126576k)

devpts on /dev/pts type devpts (rw,relatime,mode=600)

tmpfs on /extdisks type tmpfs (rw,nosuid,nodev,relatime,size=126576k)

ubi1_0 on /data type ubifs (rw,relatime)

ubi1_0 on /userdisk type ubifs (rw,relatime)

/dev/mtdblock13 on /userdisk/data type squashfs (ro,relatime)

ubi1_0 on /etc type ubifs (rw,relatime)

none on /dev/cgroup/mem type cgroup (rw,relatime,memory)

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Linux version 3.10.14 (jenkins@JenkinsServer) (gcc version 4.8.5 (crosstool-NG crosstool-ng-1.22.0) ) #1 SMP Fri Jul 14 15:25:20 CST 2017

[    0.000000] 

[    0.000000]  The CPU feqenuce set to 880 MHz

[    0.000000] GCMP present

[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)

[    0.000000] Software DMA cache coherency

[    0.000000] Determined physical RAM map:

[    0.000000]  memory: 10000000 @ 00000000 (usable)

[    0.000000] Initrd not found or empty - disabling initrd

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x00000000-0x0bffffff]

[    0.000000]   Normal   [mem 0x0c000000-0x0fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x00000000-0x0fffffff]

[    0.000000] On node 0 totalpages: 65536

[    0.000000] free_area_init_node: node 0, pgdat 805a2980, node_mem_map 8c000000

[    0.000000]   DMA zone: 384 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 49152 pages, LIFO batch:15

[    0.000000]   Normal zone: 128 pages used for memmap

[    0.000000]   Normal zone: 16384 pages, LIFO batch:3

[    0.000000] Detected 3 available secondary CPU(s)

[    0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.

[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

[    0.000000] PERCPU: Embedded 7 pages/cpu @8c204000 s6848 r8192 d13632 u32768

[    0.000000] pcpu-alloc: s6848 r8192 d13632 u32768 alloc=8*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

[    0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5 uart_en=0 factory_mode=0 usb_u3=0

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.000000] Writing ErrCtl register=00054100

[    0.000000] Readback ErrCtl register=00054100

[    0.000000] allocated 524288 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 251564k/262144k available (4561k kernel code, 10580k reserved, 1208k data, 1584k init, 0k highmem)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000] NR_IRQS:128

[    0.000000] console [ttyS1] enabled

[    0.130000] Calibrating delay loop... 563.20 BogoMIPS (lpj=2816000)

[    0.190000] pid_max: default: 32768 minimum: 301

[    0.190000] Mount-cache hash table entries: 512

[    0.200000] Initializing cgroup subsys memory

[    0.200000] launch: starting cpu1

[    0.200000] launch: cpu1 gone!

[    0.200000] CPU1 revision is: 0001992f (MIPS 1004Kc)

[    0.200000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.

[    0.200000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

[    0.200000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

[    0.260000] Synchronize counters for CPU 1: done.

[    0.270000] launch: starting cpu2

[    0.270000] launch: cpu2 gone!

[    0.270000] CPU2 revision is: 0001992f (MIPS 1004Kc)

[    0.270000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.

[    0.270000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

[    0.270000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

[    0.330000] Synchronize counters for CPU 2: done.

[    0.340000] launch: starting cpu3

[    0.340000] launch: cpu3 gone!

[    0.340000] CPU3 revision is: 0001992f (MIPS 1004Kc)

[    0.340000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.

[    0.340000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

[    0.340000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.

[    0.400000] Synchronize counters for CPU 3: done.

[    0.410000] Brought up 4 CPUs

[    0.410000] devtmpfs: initialized

[    0.410000] NET: Registered protocol family 16

[    0.700000] release PCIe RST: RALINK_RSTCTRL = 7000000

[    0.710000] PCIE PHY initialize

[    0.710000] ***** Xtal 40MHz *****

[    0.710000] start MT7621 PCIe register access

[    1.290000] RALINK_RSTCTRL = 7000000

[    1.290000] RALINK_CLKCFG1 = 73ffef88

[    1.300000] 

[    1.300000] *************** MT7621 PCIe RC mode *************

[    1.780000] pcie_link status = 0x3

[    1.790000] RALINK_RSTCTRL= 7000000

[    1.790000] *** Configure Device number setting of Virtual PCI-PCI bridge ***

[    1.800000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2

[    1.800000] PCIE0 enabled

[    1.800000] PCIE1 enabled

[    1.810000] interrupt enable status: 300000

[    1.810000] Port 1 N_FTS = 1b105000

[    1.810000] Port 0 N_FTS = 1b105000

[    1.820000] config reg done

[    1.820000] init_rt2880pci done

[    1.830000] FPU Affinity set after 11720 emulations

[    1.850000] bio: create slab dst:ifb0

[   42.890000] init_netlink, create socket ok.

[   42.900000] Module MiNetlink initialized

[   42.900000] init_webfilter_match, succeed!

[   43.180000] webfilter_htable_purge, purge 0 rules, total rule nums=0

[   43.190000] webfilter_htable_purge, purge 0 rules, total rule nums=0

[   45.230000] led=6, on=1, off=4000, blinks,=1, reset=1, time=4000

[   45.240000] led=10, on=1, off=4000, blinks,=1, reset=1, time=4000

[   45.250000] led=8, on=4000, off=1, blinks,=1, reset=1, time=4000




遇到高人了?

帖子字数超限,漏掉了一些信息。

NAND分区信息:

[    3.570000] Creating 13 MTD partitions on "MT7621-NAND":

[    3.570000] 0x000000000000-0x000007f80000 : "ALL"

[    3.580000] 0x000000000000-0x000000080000 : "Bootloader"

[    3.590000] 0x000000080000-0x0000000c0000 : "Config"

[    3.590000] 0x0000000c0000-0x000000100000 : "Bdata"

[    3.600000] 0x000000100000-0x000000140000 : "Factory"

[    3.610000] 0x000000140000-0x000000180000 : "crash"

[    3.610000] 0x000000180000-0x0000001c0000 : "crash_syslog"

[    3.620000] 0x0000001c0000-0x000000200000 : "reserved0"

[    3.630000] 0x000000200000-0x000000600000 : "kernel0"

[    3.630000] 0x000000600000-0x000000a00000 : "kernel1"

[    3.640000] 0x000000a00000-0x000002a00000 : "rootfs0"

[    3.640000] 0x000002a00000-0x000004a00000 : "rootfs1"

[    3.650000] 0x000004a00000-0x000007f80000 : "overlay"

[    3.660000] [mtk_nand] probe successfully!

最后更新:2017-08-13 22:12:22

  上一篇:go 无法开启迅雷下载
  下一篇:go 在小米商城APP购买的小米路由器为什么不能点亮图标?