阅读279 返回首页    go iPhone_iPad_Mac_apple

Stand sensor not working after update

Since the update to 1.01 my watch no longer registered when I am standing or sitting and the reminders do not work. I have reset the watch, even erased it and set it back up and still nothing. Has anyone else experienced this and is there a way to make start back working?

Hi

 

For the purpose of crediting the hourly Stand achievement, your Apple Watch aims to identify when you have stood up and moved around for at least one minute during that hour.

 

Apple Watch uses an accelerometer to identify movement, so arm movement equivalent to changing from a seated to a standing position followed by a minute's walk around with your arms swinging naturally should help to register this.

 

If you believe that you have met this requirement, but Stand credits are still not being awarded, it may help to follow these steps, which have previously resolved the same issue for other users:

 

 

  • On your iPhone in the Watch app, go to: My Watch > General > Wrist Detection - confirm that this is turned on.
    • Note that Wrist Detection can be affected by temporary or permanent skin changes, such as by some wrist tattoos.
    • Stand credit will not be awarded unless Wrist Detection is enabled.

 

  • If Passcode is enabled, check that you are unlocking your watch each day after placing it on your wrist and that you are wearing your watch sufficiently snugly (neither too tightly nor too loosely).

 

  • On your iPhone, in the Watch app, go to: My Watch > Privacy > Motion & Fitness - turn Fitness Tracking off.

 

 

  • Re-enable Fitness Tracking.

 

It may also help to calibrate your Apple Watch, including resetting any existing calibration data:

 

 

Activity-related estimations also depend, in part, on your personal information. To check that this is accurate - and to update it over time:

 

  • On your iPhone, in the Watch app, go to: My Watch (tab) > Health > Edit - tap and adjust items, then tap on Done.

 

During general daily wear and when using the Workout app to record workouts when GPS data is either not relevant or not available (eg Indoor Walk), the Activity app and Workout app track your arm motion (measured by the accelerometer) when estimating results.

 

For the best results, allow the arm on which you are wearing your Apple Watch to swing naturally as you move around during daily wear and to move as expected during workouts.

The sensor tells you stand for a minute. You do then sometimes it registers & other times it does not! ? Tried switching of, resetting etc. One day it will work not bad then the next it will not register,even although have been standing & doing things.

Hi

 

For the purpose of crediting the hourly Stand achievement, your Apple Watch aims to identify when you have stood up and moved around for at least one minute during that hour.

 

Apple Watch uses an accelerometer to identify movement, so arm movement equivalent to changing from a seated to a standing position followed by a minute's walk around with your arms swinging naturally should help to register this.

 

If you believe that you have met this requirement, but Stand credits are still not being awarded, it may help to follow these steps, which have previously resolved the same issue for other users:

 

 

  • On your iPhone in the Watch app, go to: My Watch > General > Wrist Detection - confirm that this is turned on.
    • Note that Wrist Detection can be affected by temporary or permanent skin changes, such as by some wrist tattoos.
    • Stand credit will not be awarded unless Wrist Detection is enabled.

 

  • If Passcode is enabled, check that you are unlocking your watch each day after placing it on your wrist and that you are wearing your watch sufficiently snugly (neither too tightly nor too loosely).

 

  • On your iPhone, in the Watch app, go to: My Watch > Privacy > Motion & Fitness - turn Fitness Tracking off.

 

 

  • Re-enable Fitness Tracking.

 

It may also help to calibrate your Apple Watch, including resetting any existing calibration data:

 

 

Activity-related estimations also depend, in part, on your personal information. To check that this is accurate - and to update it over time:

 

  • On your iPhone, in the Watch app, go to: My Watch (tab) > Health > Edit - tap and adjust items, then tap on Done.

 

During general daily wear and when using the Workout app to record workouts when GPS data is either not relevant or not available (eg Indoor Walk), the Activity app and Workout app track your arm motion (measured by the accelerometer) when estimating results.

 

For the best results, allow the arm on which you are wearing your Apple Watch to swing naturally as you move around during daily wear and to move as expected during workouts.

最后更新：2017-09-18 02:33:38

  上一篇：go Trade In value?
  下一篇：go Mac Book Pro 2017 Tingly Fingers