825      iPhone_iPad_Mac_apple

iOS7 iPad Belkin Keyboard

I have a Belkin iPad Bluetooth Keyboard Case.

Keyboard Folio Model #: F5L114:

https://www.belkin.com/us/support-product?rnId=6819

After updating my iPad to iOS7 the only keystroke/button that works is the "Keyboard" button which will toggle the on screen keyboard on and off. Attempting to repair the keyboard accomplished nothing, however I did learn that when prompted to enter the bluetooth 4 digit code for pairing the keyboard was able to send the 4 numerical digits and striking the return key did succesfully pair the keyboard to the iPad again.

At this time I have no solution to getting the keyboard to be responsive with the iPad. If anyone has a solution for this please speak up, if not Apple please help- The Belkin "Customer Support" pages/contacts are horrible for this. There is no assistance to be had at Belkin at this time.

One more solution if all others above-mentioned haven't helped you out:

Holding either of these key combinations for more than five (5) seconds will clear the memory slot and you will have to pair the keyboard again with a device.

Fn + 1 (Blue)

Fn + 2 (Purple)

https://www.belkin.com/us/support-article?articleNum=117704

I suppose this enables Belkin to well 'forget' you device and re-connect it.

*Bump*

Exact same thing with me

Oh nvm, I just rebooted my IPad and the keyboard worked. Give it a try.

iF iOS7 broke your keyboard, unfortunately it's up to Belkin to make their keyboard work with iOS7, not the other way around.

with the on screen keyboard people have had to go into the settings and reset all settings to clear up issues.  And I had to re'pair my keyboard to my ipad, so you might try that. Tell your iPad to forget the keyboard, then re'pair it.

Solved - Simply turned the iPad off and then turned it on again. Keyboard is fine after reconnecting after restart.

Thanks everybody!  I had tried 2 different bluetooth keyboards. Amazing that it never occurred to me to simply reboot!  HA!!!  :-)

I am still having issues after restart and re-pairing

I am also having this issue. My Belkin iPad keyboard / folio case was purchased in mid August. I followed the directions and it connected just fine and was working great until I updated the iPad to iOS 7. Now the keyboard will not connect or pair. A quick message pops up with the 4 didget code but then immedetly a message pops up saying "Pair Unsucessful - Make sure "Keyboard" is turned on and in range, and is ready to pair - OK."

I have tried re-booting the iPad and still this happens. having issues here and I blame the iOS 7 update.

Apple please advise.

Ty

Did you try to go into the settings and reset all settings?

I'm also having post ios7 update problems on iPad mini with Belkin Bluetooth keyboard. I went int settings and got the iPad to forget the keyboard. Now it won't pair. I get prompted to add a random 4 digit pin and press enter key on the keyboard then it fails to pair. This worked perfectly with ios6. Luckily still under warranty so I think I'll return the belkin keyboard. Unless someone knows how to fix it?????????

I too had the same problem. no matter how hard I tried my Belkin Keyboard would not connect to my iPad. it would attempt to connect but the pairing would always be unsuccessful. i tried everything, re-booted my ipad, turned my ipad on and off, turned bluetooth on and off, etc. NOTHING worked. I read all these articles blaming Apple and the iOS7 upgrades and Belkin but eventually I found the below instructions online that sorted everything and now it works perfectly.

Here are the instruction on how to pair your keyboard with your ipad:

1. Go to the Home screen on your iPad and tap on “Settings > General > Bluetooth.”

2. Turn Bluetooth to “On.”

3. Turn on the keyboard and press and hold the “pair” key.

4. The Status LED will flash blue on the keyboard and the keyboard will show up under “Devices” on the

tablet. Select “Belkin Bluetooth Keyboard.”

5. A code will appear on the iPad screen. Enter this code followed by the “Enter” key using the keyboard.

6. When pairing is complete, the iPad will notify you that the pairing was successful. The keyboard will then be

paired to your iPad.

7. If after 60 seconds pairing fails, you will have to repeat the steps above. You can view the status from the

screen of the iPad.

8. You can now use the keyboard to type onto your iPad.

Thank you SparkyAKL!!! You have saved me alot of hours trying to solve this problem.

One more solution if all others above-mentioned haven't helped you out:

Holding either of these key combinations for more than five (5) seconds will clear the memory slot and you will have to pair the keyboard again with a device.

Fn + 1 (Blue)

Fn + 2 (Purple)

https://www.belkin.com/us/support-article?articleNum=117704

I suppose this enables Belkin to well 'forget' you device and re-connect it.

This worked for me!  Thanks!

最后更新：2017-09-12 14:30:19

  上一篇： Japanese Text Scrambled on emails from iPad

  下一篇： News App and RSS