Problem with WD external hard drive
I have a mid-2012 MBP retina display. Used to connect "My Passport for Mac" WD hard drive and work and store stuff on it.
My macbook stopped recognizing it a couple of days ago and does not mount only. I have changed the micro usb lead and still it does not mount up.
Bought the disk about a year and half back.
What could be the problem?
Hello baloney123456,
Thank you for using Apple Support Communities!
It sound slike the external hard drive is no longer recognized in Mountain Lion.
I think it would be a good idea to reset your PRAM and SMC to see if that gets it to show back up.
Resetting NVRAM / PRAM
- Shut down your Mac.
- Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
- Turn on the computer.
- Press and hold the Command-Option-P-R keys before the gray screen appears.
- Hold the keys down until the computer restarts and you hear the startup sound for the second time.
- Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.
From: About NVRAM and PRAM
And
- Shut down the computer.
- Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
- On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
- Release all the keys and the power button at the same time.
- Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.From: Intel-based Macs: Resetting the System Management Controller (SMC)
Take care,
Sterling
Hi
There isn't any problem with my macbook, but problem with the Hard drive itslef. the usb connector port has shifted from its place making it difficult for the usb cable to reach there.
I have changed the micro usb lead
When you say "micro USB lead" what are you referring to specifically?
Most likely your problem is the SATA bridge card. External USB HD have an EXTREMELY HIGH failure rate on this part.
LIkely (very) your SATA card is fried inside the box for same.
External HD are very easy to diagnose. Bad USB cable (on commercial sold USB drives) almost doesn’t exist anymore.
External USB HD have 4 'parts' (not counting the HD internals)
1. USB cable (never an issue anymore, approaching 100%)
2. HD enclosure.....a plastic or metal box which cannot ever be an issue.
3. the HD itself
4. ....and last but not least is the epicenter of 'weak links' ,.....a SATA card/bridge that is connected to the HD inside the HD box, the size of a stick of gum, with SATA female on one side, and female USB on the other side, containing circuitry for data transfer between the SATA on the HD and to USB on the other.
While these bridge cards are better than they used to be, theyre still insanely unreliable.
There are 1000s of perfect external hard drives out there thrown away every year because people assume the "hard drive is bad" when really they could crack open the HD enclosure, remove the HD and put the good HD into a new enclosure.
See this video of the SATA CARD, its at 8:55min. https://www.youtube.com/watch?v=2pS_EDsP2KI
All conventional HD external are nearly 100% like the video above.
See pic below,..a (much larger) SATA card as found inside a typical HD enclosure ($20 ebay)
This is the nasty piece pictured below causing all the "crazy" activity seen on external HD, very odd behaviour, some have called it "haunted hard drive syndrome". Random ejects, random strange vanishing of the HD , especially in mid transfer of data.
the card attached to the TOP of the HD where it plugs in, that the SATA bridge connects to and is easily removed like unhooking 2 LEGO pieces.
Verify your HD doesnt show up in another USB port and another Mac, very likely your HD is fine, and only needs to be manually extracted and placed into a new HD enclosure.
Inside a USB hard drive, containing the HD and SATA card
I have tried all of these solutions and nothing helps
I just purchased a new glyph blackbox pro 3TB. It appeared to be fully functioning upon delivery (powered up and looks like its in pristine shape) ... I used it for the first time earlier this week. Something happened soon after I began using it. Now it powers up (green light flashing) but my mac cannot find the drive or does not recognize it
Tuesday night I plugged it in to my mac laptop, powered it up, and saw that it was listed as an external drive ... I then partitioned the drive, designating 1.5 for backups and 1.5 for the automatic time machine backups. Smooth process so far.
I transferred my files over from my macbook air (the Ssd was full) to the glyph external drive, deleted the originals from my mac to free up drive space, and then ran the time machine application which showed up as competed and fully functioning. 128 GB transferred in about 20 min time
Maybe an hour later noticed that the drive was not showing up in "my computer" and the pop up notification "drive removed without being ejected" warning was on my desktop.
As of right now I have been attempting to trouble shoot the issue but i cannot get the drive to reappear on my mac. It appears to be powered up and has a tight connection to the laptop via USB... but it simply isn't recognized by the computer.
Update: it now "sees" the glyph drive but it wont mount and my macbook air cannot see the partitioned drives
I am at a loss. All my videos and all my pics are are the drive.
I have been told to use Disk Warrior - would that halp or would that be a waste of 120 bucks?
Plotinus thanks for the info. Have you seen this specific error before?
最后更新:2017-08-20 01:53:16
上一篇:
New Apple ID
下一篇:
ipnotify.action
how do I cancel Apple Music subscription
Lost music after changing Apple Store
iMac (27inch, mid 2011) WIFI connects only onto...
MBP 15" 2016, first popping sound and now blown...
I need to cancel my monthly subscription to icl...
Can not add Ring Tones from my iPhone 6 to my i...
Persistent ”Carrier Update” requests
want to reset the computer to the original fact...
Switching same game ID in game center
In iTunes has signed up for a program tha...
相关内容
"com.apple.installer.pagecontroller error
any idea what error 3503 is?
Underallocation Detected on Main device
The operation couldn’t be completed. (BKA...
is ctoid.exe a virus on my ipad safari browser?
iTunes Error: Declined to authorize this image ...
Keep High Efficiency Original if Available Chec...
iTunes 12.7 cannot edit playlist
High Sierra Stuck & Decryption paused
Need to unlock iphone 5 to reactivate the phone...
热门内容
Christian Music Removed From Itunes
I'm being billed twice every month for Apple Mu...
iMac running slow
Fix disappearing album art after moving iTunes
Activation Locked iWatch
Can I change the iwatch to miles instead of kil...
I keep seeing the "You don't have permission to...
can't read any menus macbook air
iPad 2, iOs9.3, taking days to restore
charges made under itune memeberships